Filter
Top Products
26
|
English
CD/MP3/WMA/External disc control features
Function of the KDC-W7027
Function of MP3/WMA
Folder Select
Quickly selecting the folder you want to listen to.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "FSEL" is
displayed above the [5] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
2 Enter Folder Select mode
Press the [5] ("FSEL") button.
"Select Mode" is displayed.
During Select mode the folder information is
displayed as shown below.
Folder name display
Displays the current folder name.
3 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and
with the [AM] button 1 level up.
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous
folder, and with the [¢] button to the next
folder.
Returning to the top level
Press the [4] ("HOME") button.
Scrolling the folder name display
Press the [SCRL] button.
4 Decide the folder to play
Press the [2] ("OK") button.
The Folder Select mode releases, and the MP3/
WMA in the folder being displayed is played.
• The methods for moving to other folders in the folder
select mode are different from those in the folder
search mode.
See 'Notes on playing MP3/WMA' (page 6) for details.
Canceling the Folder Select mode
Press the [3] ("EXIT") button.
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
• A title can’t be attached to an MD.
• Refer to the 'Text Display Switching' (page 15) and
select the "DNPS" display. No name can be attached
to the source if "DNPS" cannot be selected for it.
2 Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"NAME SET" is displayed.
3 Move the cursor to the enter character
position
Press the [4] or [¢] button.
4 Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character
type switches as shown below.
Character type Button
Alphabet (Upper case/ Lower case) [2] ("CAPS")
Numbers and symbols [3] ("NUM")
Special characters (Accent characters) [4] ("CHAR")
5 Select the characters
Press the [FM] or [AM] button.
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• The name of a CD can be changed by the same
operation you used to name it.