Filter
Top Products
English
|
33
When hands free unit connecting
Auto Response time Adjust
Setting the time from an incoming call to the
automatic response.
Display and Setting
"HF WT OFF"
"HF WT 1S"
…
"HF WT 5S" (Original setting)
…
"HF WT 30S"
•
If the time set in the GSM telephone is shorter than
that set in the unit, the former will be used.
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.
Manual Clock Adjustment
• This adjustment can be done when the 'Synchronize
Clock' (page 33) is set as OFF.
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2 Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1
second.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4 Exit Clock adjustment mode
Press the [MENU] button.
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
Display Setting
"SYNC ON" Synchronizes the time.
"SYNC OFF" Adjust the time manually.
• It takes 3 to 4 minutes to synchronize the clock.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"DSI ON" LED flashes.
"DSI OFF" LED OFF.
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
"Button Red" The illumination color is red.
"Button Green" The illumination color is green.
Triangle indicator setting
Sets the blinking mode during triangle indicator
system adjustment (such as audio control, multi-
key system setup).
Display Setting
"∞Blink ON" The Triangle indicator blinks.
"∞Blink OFF" The Triangle indicator does not blink.