Filter
Top Products
English
|
35
In Standby mode
Built-in Amp Mute Setting
Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display Setting
"A MP Mute OFF" The built-in amplifier activates.
"A MP Mute ON" The built-in amplifier deactivates.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"A MP Bass FLT" Bass boost level is flat.
"A MP Bass +6" Bass boost level is low (+6dB).
"A MP Bass +12" Bass boost level is mid (+12dB).
"A MP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won’t work
correctly even if it’s selected.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display Setting
"A MP Freq NML" Boost with the normal central frequency.
"A MP Freq Low" Drop the normal central frequency 20%.
News Bulletin with Timeout Setting
It switches automatically when a news bulletin
starts even if the radio isn’t being listened to. Also,
the time interval when interrupt is prohibited can
be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"
…
"NEWS 90MIN"
When "NEWS 00MIN" — "NEWS 90MIN" is set, the
News Bulletin Interrupt function is ON.
When it’s ON, the "NEWS
" indicator is ON.
When the news bulletin starts, "NEWS " is
displayed, and it switches to the news bulletin.
• If you choose the "20MIN" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was
set for 'Traffic Information' (page 20).
• This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
'Enhanced Other Network'-Network sending PTY-code
for news bulletin.
• When the News Bulletin Interrupt function is ON, it
switches to an FM station.
In Tuner mode
Local Seek
Only stations whose reception is good are
searched for in auto seek tuning.
Display Setting
"Local.S OFF" The local seek function is OFF.
"Local.S ON" The local seek function is ON.
In Tuner mode
Tuning Mode
Sets the tuning mode.
Tuning mode Display Operation
Auto seek "Auto 1" Automatic search for a station.
Preset station seek "Auto 2" Search in order of the stations
in the Preset memory.
Manual "Manual" Normal manual tuning control.