Disc Makers KDC-W7027 Car Stereo System User Manual


 
English
|
9
Notes on Multi-function Key System
Multi-function Key System serves to control various
functions with the [2] — [5] buttons.
The basic operation of the Multi-function Key
System is described below.
What’s the Multi-function Key System?
This unit is equipped with the Multi-function Key
System that enables the operation of multiple
functions with one button.
For example, you can enter the Display Control
Mode or turn ON/OFF the Random Play by pressing
the [3] button during CD play.
Setting each function
The function display will show the controllable
function of the [2] — [5] button above the button.
Pressing the [2] — [5] button below the desired
function enables the setting of the function.
Displaying the desired function
If five or more functions are available to be set with
the [2] — [5] button, they are divided into multiple
function groups (referred to as sections in this
manual) for registration.
Press the [NEXT] button to switch the sections.
If the display of the desired function is not shown,
press the [NEXT] button 1 to 3 times to switch the
sections until the wanted function display is shown.
Example: Function display of CD & External disc
source
"MRDM", "H-F", "SYNC" or "DISP" are displayed when an
optional accessory is connected.
Real operational example of the Multi-
function Key System
Example: Turning ON/OFF the Random Play during
CD play.
1. Show the function display of the Random Play.
If "RDM" is not shown in the display, press the
[NEXT] button to switch the sections until the
"RDM" function display is shown above the [3]
button.
2. Turn ON/OFF the Random Play.
Press the [3] button.
Each time the [3] button under the "RDM"
function display is pressed the Random Play is
turned ON/OFF.
EXT