Eclipse - Fujitsu Ten CD3000 Car Video System User Manual


 
22
Operation
Return to the root directory of
the CD
In the root directory, when a file cannot replay,
the system will return to the first file that can
perform a replay. (In the configuration example,
the file is returning to 001.mp3. see page 17.)
Displaying CD text
Only this CD player supports CD TEXT. It can not
be displayed with the optional CD changer. If the
CD came with a logo shown below, it is recorded
with a disc title and track titles. These information
will be displayed during playback.
Pressing the [DISP] button while text is
displayed scrolls the display in the
order DISC title TRACK title, and
then the display stops with the TRACK
title.
CD TEXT recorded with characters
other than alphanumeric and symbols
cannot be displayed.
Displaying title (MP3/WMA)
Each time the button is pressed, the
following will be displayed in order.
Folder Name/File Name* Folder No.
/File No. Tag
*:The display area shows a
maximum of 9 characters and then
scrolls to display the remaining
characters.
After the folder name is displayed,
the file name will be displayed by
scrolling. After the file name is
scrolled, the display will be fixed.
ATTENTION
Folder name/file name or tag recorded with
characters other than alphanumeric and
symbols cannot be displayed.
Ejecting the disc
The front panel opens and the disc is
ejected.
The front panel closes.
1
Press the [RTN] button.
1
Press the [DISP] button for more
than one second.
1
Press the [DISP] button for more
than one second.
1
Press the [CD ] button.
2
Remove the disc and press the
[CD ] button.
CAUTION
Do not drive with the front panel open.
The panel may cause unexpected
personal injury during a panic stop or
abrupt changes of vehicle motin.
Do not attempt to close the front panel
by hand. Doing so may damage the
panel.