Eclipse - Fujitsu Ten CD3000 Car Video System User Manual


 
56
About optional equipment
Others
Connecting portable audio
players to the AUX jack
Use a commonly available accessory cord. With
a jack for AUX cord (AUX105), portable audio
players and other external inputs can be
connected to the system.
When the AUX cord is connected to the jack, CD
changer cannot be connected to the system.
Activation of the AUX mode will light
the "AUX" indicator and channel
audio player output to the system
speakers.
ATTENTION
While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility
by turning off system power or switching
from the AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level of the connected player is
known.
Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and confirm problem-free
operation in the vehicle before proceeding.
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be
changed.
The function mode is activated.
The AUX sensitivity mode is
activated.
Turning the button allows you to
toggle through sensitivity modes as
follows:
Low Mid Hi Lowwww
ATTENTION
Input sensitivity modes are roughly as follows:
Low 1 Vrms
Mid 480 mVrms
Hi 240 mVrms
The selected settings will take effect.
At this time, other adjustments can
also be mode in function mode.
1
Turn on the portable audio player
and start its play function.
2
Switch to the AUX mode by
pressing the [DISC] button for
more than one second.
1
Press the [FUNC] button.
2
Turn the [SEL] button to select
AUX Sensitivity.
3
Press the [SEL] button.
4
Turn the [SEL] button to select the
sensitivity mode.
5
Press the [SEL] button.
6
Press the [RTN] button.
7
Press the [FUNC] or [RTN] button
to exit function mode.