Eclipse - Fujitsu Ten CD3000 Car Video System User Manual


 
54
About optional equipment
How to operate the tuner with an optional SIRIUS satellite
radio tuner connected (U.S.A. only)
About SIRIUS satellite radio
If the optional SIRIUS satellite radio tuner is
connected, satellite radio broadcast can be
received.
With SIRIUS satellite radio, over 100 channels
are available including music, sports, news, and
entertainment programs.
The channel can be selected from categories
such as POP and ROCK, or by selecting
individual channel manually.
Reception of SIRIUS satellite radio is fee based;
you have to subscribe to it.
It is possible to subscribe through the SIRIUS
radio website.
URL: http://cdn.sirius.com
ATTENTION
For information about the operation and set-up
of the SIRIUS satellite radio tuner, see the
SIRIUS satellite radio owner's manual.
The receiver will accept up to 24 stations in
memory.
Selecting the radio mode
The mode switches between satellite
radio mode and FM/AM radio mode
each time the button is pressed.
Selecting a channel
Radio bands will switch from SR1
SR2 SR3 SR4 in order each time
the button is pressed.
Turn to the right:
Selects the higher channel.
Turn to the left:
Selects the lower channel.
Reception is enabled for all channels
within the currently selected category.
(Refer to page 54 for details on
"Category selection".)
[ ] button:
Starts searching toward higher
channels.
[ ] button:
Starts searching toward lower
channels.
Category selection
The channel can be selected from among
categories such as POP and ROCK.
Consult the SIRIUS website for details of
categories.
Categories will switch in order shown
below each time button is pressed.
[ ] button:
Advances to next category.
[ ] button:
Returns to previous category.
1
Press the [FM AM] button for more
than one second.
1
Press the [FM AM] button for less
than one second to switch to the
desired SR bands.
2
Turn the [SEL] button to the left or
right to tune to a channel.
3
Press the [ ] or [ ] button for
less than one second to start the
automatic channel search.
1
Press the [ ] or [ ] button for
more than one second.