Filter
Top Products
How to operate the receiver with an optional CD changer connected
117
How to operate the receiver with an optional
CD changer connected
This section covers the operation of an optional
CD changer that is connected to the receiver.
To switch from another mode, press the [DISC]
button for less than one second.
Each press of the button switches
the mode from CD player ➔ CD
Changer 1 ➔ CD Changer 2 ➔ CD
player.
A changer or player with no discs
loaded will be skipped.
Turn to the right:Advances to the
next track.
Turn to the left:
Returns to the
beginning of the track being played.
(Repeat turning for previous tracks.)
Fast forward or rewind the song currently being
played.
[] button:Fast forward.
[] button:Rewind.
Pressing the button for less than one
second causes the changer to move
up to the next track and play it for 10
seconds, then move up to the next
track and play it for 10 seconds, and
so on, on one CD, until the button is
pressed again.
Press the button for longer than a
second to play the first 10 seconds of
the first track of every CD loaded.
ATTENTION
• To continue playing a desired
track, press the button again to
stop scanning.
• After the entire disc is scanned
once, ordinary playback starts
from the point where scanning
started.
Pressing on the button for less than
one second causes the changer to
repeat the track currently being
played, until the button is pressed
again.
Press the button for longer than a
second to repeat all tracks on the CD
being played.
Listening to a CD
1
Press the [DISC] button for less
than one second.
Advancing to the next track
or returning to the beginning
of the track being played
1
Turn the [SEL] button to the left or
right.
Fast Forward/Rewind
1
Press and hold the [ ] or [ ]
button.
Playing the beginning of
tracks (SCAN)
1
Press the [4 SCAN] button.
Repeating the same track
(REPEAT)
1
Press the [5 RPT] button.
XIII
XIV