Filter
Top Products
95
How to operate the Sound Adjustment Mode
When original sounds are converted to MP3, ATRAC3 format,
frequency ranges that are not normally audible to the human
ear are compressed. The multi-harmonizer can be used to play
back these compressed sounds at as close to their original
form as possible so that clear and powerful sound can be
enjoyed.
Multi-harmonizer
The sounds that are output from woofers include sounds that
are in the same frequency ranges that are output from the front
and rear speakers, and under the various conditions that can
occur inside vehicle compartments, some of these sounds may
cancel each other out. This phenomenon can be eliminated by
changing the phase of the woofer.
The phase of the woofer can be set to normal timing (in which
the output timing between the front and rear speakers and the
woofer is the same) or reverse timing (in which the output
timing between the front and rear speakers and the woofer is
different), depending on the vehicle compartment conditions.
Non-fader phase
E-iSERV sound effect customizations
The time alignment and crossover functions that are included
with this deck can also be adjusted in the same way by means
of the ECLIPSE web site (ADVANCE mode only). The
procedure for doing this is displayed on the screen, and
adjustment is comparatively easy using this method. Access
the ECLIPSE web site and follow the instructions that appear
on the screen. After doing this, download the adjusted data for
the Memory Stick and write it into this deck. (Refer to "Reading
sound quality data" on page 114 for details on reading the
adjustment data.)
URL: http://www.eclipse-web.com/