Epson BT-200 Car Video System User Manual


 
16
01_Chapter title
01_Head A
02__lead
Getting Ready
16
Note
If the product freezes, you can force it to shutdown by using
one of the following methods.
Slide the power switch to the [ ] side and hold it there
for at least eight seconds.
Use something thin to press the reset button for at least
two seconds.
Caution
Do not force the product to shutdown unless it freezes. Stored
data and settings may be lost.
blue. You can release Sleep mode by briefly sliding the
power switch to the [ ] side again.
Disabling controller operations (Key lock)
Slide the power switch to the side opposite the [ ] to turn
on Key lock. To release Key lock, slide the power switch to
the center.
Turning o
1
Slide the power switch to the [ ] side and hold it
there for at least one second.
The [Power o] screen is displayed.
2
Touch the trackpad, move [ ] to [OK], and then
tap the trackpad to conrm.
The power turns o.
Reset button