Filter
Top Products
MPA 152 Amplier • Installation
2-3
Rack mounting procedures
The unit can be mounted in the front or rear of any of these rack
systems:
RSU 126 — 6" deep 1U rack shelf kit (PN • 60-190-10)
RSB 126 — 6" deep 1U basic rack shelf (PN • 60-604-11)
RSU 129 — 9.5" deep 1U rack shelf kit (PN • 60-190-01)
RSB 129 — 9.5" deep 1U basic rack shelf (PN • 60-604-02)
To rack mount the MPA 152, follow these directions:
1. If necessary, remove rubber feet from the bottom of the unit.
2. Secure the MPA 152 to the shelf with two 4-40 x 3/16"
screws in opposite corners of the base (see gure 2-1 below).
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts.
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
Both front false faceplates
use 2 screws.
1/4 Rack Width Front False
Faceplate
1/2 Rack Width Front False
Faceplate
Figure 2-1 — Rack mounting
Tabletop placement
Attach the four provided rubber feet to the bottom of the unit
and place it in any convenient location.