Filter
Top Products
MPA 152 Amplier • Installation
Installation, cont’d
2-4
Projector mounting
The instructions for mounting the amplier near the projector,
using the PMK 300 projector mounting kit (PN 70-374-01), are
shown below. For instructions on using other Extron projector
mounting kits, consult the user guide for that kit.
1. If necessary, remove the rubber feet from the bottom of the
MPA 152.
2. Mount the receiver to any of the bracket's three mounting
plates. The unit should be vertically mounted with the
rear panel, housing the input and output connectors,
facing downwards.
Extron
PMK 300
Multi Product
Projector
Mount Kit
U-Bolt
Rubber Pad
Backing
Brace
Clamping
Plate
Figure 2-2 — Projector mounting
N
On the side mounting plates, the device is typically
mounted on the outside of the bracket. On the front
mounting plate, the device is mounted on the inside of
the bracket.