Filter
Top Products
3. If mounting the monitor using another manufacturer’s solution, use the screws previously removed
from the monitor base to mount the display to a swing arm or other mounting fixture. Consult the
documentation included with the mounting fixture for additional instructions.
CAUTION: This monitor supports the VESA industry-standard 100mm mounting holes. To attach
a third-party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are
required (not provided with the monitor). Longer screws should not be used because they may
damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with the monitor.
Figure 3-17 Mounting the Monitor Using a Third-Party Solution
16 Chapter 3 Setting Up the Monitor