Filter
Top Products
Icon Main Menu Submenu Description
Recommended Settings Provides the recommended resolution mode and refresh rate for
the monitor.
Serial Number Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Version Reports the firmware version of the monitor.
Backlight hours Reports the total hours of backlight operation.
Video Input
Control
Selects the default or primary video input signal when the monitor
is connected to two active and valid video sources. The monitor
automatically determines the video format. The default input
selection is DVI-D.
DVI-D Selects DVI-D input.
VGA Selects VGA input.
Disable Input Auto-
Switching
Keeps the monitor's video input selection at its current setting.
This menu selection is visible if the video input control is set to
Enable Input Auto-Switching.
Enable Input Auto-
Switching
Automatically returns the monitor's video input to the default auto-
switching mode. This menu selection is visible if the video input
control is set to Disable Input Auto-Switching.
Factory Reset Returns all OSD menu settings to the factory default setting,
except the Language setting.
Exit Exits the OSD menu screen.
Table 4-2 OSD Menu (continued)
Adjusting the Monitor Settings 25