Filter
Top Products
If mounting the monitor using another manufacturer’s solution, use the screws previously removed from
the monitor stand to mount the display to a swing arm or other mounting fixture. Consult the
documentation included with the mounting fixture for additional instructions.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a
third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required
(not provided with the monitor). Longer screws must not be used because they may damage the monitor.
It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard
and is rated to support the weight of the monitor display panel. For best performance, it is important to
use the power and video cables provided with the monitor.
Locating the Rating Labels
The rating labels on the monitor provide the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating labels are
located on the rear panel of the monitor display head.
Figure 3-23 Locating the Rating Labels
NOTE: The rating labels on some models may look different than the rating labels shown above.
ENWW Locating the Rating Labels 19