Filter
Top Products
8
US
x
xx
x Displaying the current input signal
When you press the button to display the menu, information
on the current input signal is displayed. If the current input signal
matches one of the monitor’s factory preset modes, the resolution
and vertical frequencies are displayed. (See page 20 for a list of
factory preset modes.) If the current input signal does not match
one of the factory presets, the horizontal and vertical frequencies
are displayed.
Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected video input connector.
1
Press the button.
The menu appears on the screen.
2
Press the m/M buttons to highlight CONTRAST/
BRIGHT. Then press the button.
The CONTRAST/BRIGHT menu appears on the screen.
3
Press the m/M buttons to highlight 6 (CONTRAST)
or (BRIGHTNESS). Then press the button.
4
Press the </, buttons to adjust the contrast (6)
or brightness ( ).
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE ( ) of the
OPTION ( ) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
You cannot adjust the contrast (6) or brightness ( ) on this
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the OPTION ( ) menu.
For more information about using the sRGB mode, see
“Adjusting the color of the picture (COLOR)” on page 12.
OPTION (page 14)
Adjusts the monitor’s
options.
The options include:
• locking the controls
• changing the on-screen
menu’s language
• changing the on-screen
menu position
• changing the picture’s
color temperature setting
mode
0 RESET (page 14)
Resets the adjustments.
OPT ONI
CONTROL
LOCK
OFF
ON
1600x1200 / 85Hz
RESET
CURRENT
MODE
CANCEL
OK
1
2
1600x1200 / 85Hz
CONTRAST
85
1600x1200 / 85Hz
EXIT
the vertical
frequencies of
the current
input signal
the resolution or
horizontal frequencies
of the current input
signal
s
:/
RGB
1600x1200 / 85Hz
CONTRAST/ IBR GHT