Filter
Top Products
14
US
Additional settings (OPTION)
You can lock the controls, change the on-screen language, change
the menu position, and set the COLOR mode.
1
Press the button.
The menu appears on the screen.
2
Press the m/M buttons to highlight
OPTION and press the button.
The OPTION menu appears on the screen.
3
Press the m/M buttons to select the desired
adjustment item.
Adjust the selected item according to the following
instructions.
x
xx
x Locking the controls (CONTROL LOCK)
You can protect the adjustment data by locking the controls.
Press the m/M buttons to highlight (CONTROL
LOCK) and press the button. Then press the m/M
buttons to select ON and press the button.
Only the ! (power) button, button, (input) switch, ,
and (CONTROL LOCK) of the OPTION menu will
operate. If any other items are selected, the mark appears on
the screen.
To cancel the control lock
Repeat the procedure above and set (CONTROL LOCK) to OFF.
x
xx
x Changing the on-screen language
(LANGUAGE)
See page 7.
x
xx
x Changing the menu’s position
(OSD POSITION)
Change the menu’s position if it is blocking an image on the
screen.
Press the m/M buttons to select (OSD POSITION)
for horizontal adjustment, or (OSD POSITION) for
vertical adjustment and press the button. Then
press the </, buttons to shift the on-screen menu.
Then press the button.
x
xx
x Setting the COLOR mode
See page 12.
Resetting the adjustments (RESET)
This monitor has the following 2 reset methods.
x
xx
x Resetting all the adjustment data for the
current input signal
1
Press the button.
The menu appears on the screen.
2
Press the m/M buttons to highlight
0 RESET and press the button.
3
Press the m/M buttons to select 01 (CURRENT
MODE) and press the button.
4
Press the m/M buttons to select OK.
Note that the following items are not reset by this method:
• on-screen menu language (page 7)
• color mode setting in the OPTION menu (PRESET,
VARIABLE, EXPERT, sRGB) (page 12)
• color temperature setting in the PRESET mode (9300K,
6500K, 5000K) (page 12)
• on-screen menu position (page 14)
x
xx
x Resetting all of the adjustment data for all
input signals
Select 02 (ALL MODES) in step 3 above.
Note
The RESET function does not function when (CONTROL LOCK)
is set to ON.
RESET
CURRENT
MODE
CANCEL
OK
1
2
1600x1200 / 85Hz