54
Insignia 32" LED TV
www.insigniaproducts.com
• TV Speakers—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones and
the TV speakers. You can select:
• Auto (default setting)—Automatically turns
off the TV speakers when you connect a
device to the AUDIO OUT/ jack. When the
device is disconnected, the TV speakers turn
on automatically.
• On—Always plays the audio through the TV
speakers. If a device is connected to the
AUDIO OUT/ jack, the audio is played
through both the TV speakers and the
device.
• Off—Turns off the TV speakers and plays the
audio only through the device connected to
the AUDIO OUT/ jack. If you disconnect
the device, the TV speakers remain turned
off.
• Digital Audio/SPDIF—Sends digital audio to an
external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language Default—(Digital channels
only) Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
AUDIO OUT/ jack on the side of your TV to
connect headphones, a home theater system,
sound bar, or external speaker system. You can
select:
• Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones, a home theater system, or a
sound bar you connected to the
AUDIO OUT/ jack.
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system or sound bar you connected
to the AUDIO OUT/ jack to control the
audio.
• Reset Audio Settings—Reset all audio settings
to factory defaults.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device to the
AUDIO OUT/ jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
AUDIO OUT/ jack on the side of your TV. The
following screen opens.
2 Press
W
or
X
to highlight the audio out mode you
want to use, then press ENTER. You can select:
• Headphones/Audio Out Variable—Select this
option to use the remote control that came with
your TV to control the audio from headphones, a
home theater system, or a sound bar you
connected to the AUDIO OUT/ jack.
• Audio Out Fixed—Select this option to use the
remote control that came with the home theater
system or sound bar you connected to the
AUDIO OUT/ jack to control the audio.
Note
You can also press MTS/SAP one or more
times to select the audio mode.
