Filter
Top Products
30
NS-42D240A13 Insignia 42" 1080p LED TV
www.insigniaproducts.com
B If you select Cable, a message asks if you
have a cable box:
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Ye s , then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
C If you select Satellite Box, a message asks
how you connected the satellite box to your
TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Hiding channels
You can hide channels in the channel list. When you
press CH or CH , your TV skips the hidden
channels. You can still tune to a hidden channel by
pressing the number buttons for the channel.
To hide channels:
1 Press MENU. The on-screen menu opens.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel list.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel list.
MOVE
No
SELECT PREVIOUS
EXIT
MENU EXIT
OK
ENTER
Channels • Auto Channel Search
Do you have a Cable Box?
No
Yes
PICTURE CHANNELS SETTINGS PHOTOSAUDIO
MOVE SELECT PREVIOUS
EXIT
MENU EXIT
OK
ENTER
Channels • Auto Channel Search
How did you connect the cable box to the TV?
AV, Component, or HDMI
Coaxial
PICTURE CHANNELS SETTINGS PHOTOSAUDIO
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
MOVE SELECT PREVIOUS
EXIT
MENU EXIT
OK
ENTER
Channels • Auto Channel Search
How did you connect the satellite box to the TV?
AV, Component, or HDMI
Coaxial
PICTURE CHANNELS SETTINGS PHOTOSAUDIO
Adjust settings to affect picture quality
MENU EXIT
OK
ENTER
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
Energy Savings
44
55
75
MOVE SELECT PREVIOUS
EXIT
MENU EXIT
OK
ENTER
PICTURE CHANNELS SETTINGS PHOTOSAUDIO