Filter
Top Products
5
Insignia 42" 1080p LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV screen, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
TV components
Package contents
• Remote control and batteries (2 AAA)
• Stand column, stand, and screws (9)
• QUICK SETUP GUIDE
•IMPORTANT INFORMATION
Front
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 50.)
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
7.84 in. (200 mm)
7.84 in. (200 mm)
Wall-mount brackets
# Item Description
MENU
Press to open the on-screen menu. For more
information, see “Navigating the menus” on page 23.
VOL+/VOL– Press to increase or decrease the volume.
CH
S/CH T
Press to go to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 23.
INPUT
Press to open the INPUT SOURCE list, press INPUT or
press CH S or CHT to select a video input source.
When you highlight the video input source, your TV
changes to the new source after three seconds. For
more information, see “Selecting the video input
source” on page 22.
In menu mode, press to confirm selections.
(power)
Press to turn your TV on or off (standby mode).
Warning: When your TV is off, power still flows
through it. To completely disconnect power, unplug
the power cord.
Remote control sensor Receives signals from the remote control. Do not block.
Power indicator
Turns off when your TV is on.
Lights red when your TV is off (standby mode).
1
2
3
5
4
7
6
1
2
3
4
5
6
7