Filter
Top Products
16
Insignia 55" LED TV
www.insigniaproducts.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI3/DVI jack on the side of your TV.
5 Connect an audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT
jacks on the cable or satellite box.
6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or
T
to highlight HDMI 3, then press ENTER.
Note
You must use the HDMI3/DVI jack to connect a cable or satellite box using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Audio cable
Side of TV
HDMI cable
connector
Audio
connector
HDMI3/DVI
jack
DVI AUDIO
IN jack
On your TV