Filter
Top Products
30
Insignia 55" LED TV
www.insigniaproducts.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI3/DVI jack on the side of your TV.
4 Connect an audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT
(headphone) jack on the computer.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to highlight HDMI3, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
HDMI cable
connector
Audio cable
connector
HDMI jack DVI AUDIO
IN jack
On your TV
HDMI cable with
HDMI-DVI adapter
Audio cable
Side of TV