Filter
Top Products
13
UV8020
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays “DO NOT
WATCH VIDEO WHILE DRIVING” with a black
background. Rear video screens, if applicable, will
operate normally.
Inserting a Disc
To insert a disc, you must first press the /EJECT button (5)
on the control panel or remote control (23) to reveal the disc
slot (11). Insert a disc, label side up, into the disc slot. The
front panel will close automatically and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see “System
Setup Menu” on page 11).
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: The unit is designed for play of standard 5” (12
cm.) discs only. Do not attempt to use 3” (8 cm.) CD
singles in this unit, either with or without an adaptor, as
damage to the player and/or the disc may occur. Such
damage will not be covered by the warranty on this
product.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
NOTE: If you do not insert a disc or SD card, you must
press the EJECT button to close the control panel.
Ejecting a Disc
To eject a disc, you must first press the /EJECT button (5)
on the control panel or remote control (23) to reveal the disc
slot (11). Press the /EJECT button (13) behind the TFT
panel to eject the disc. The unit automatically reverts to Tuner
mode.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the SRC button (2) on the front panel or remote control
(8) until “READ” appears near the top of the screen. You can
a
also change the source by touching the top left corner to
display the “SOURCE” menu. Select “DISC” to access DVD
mode.
Controlling Disc Playback
During DVD/VCD playback, press the center of the screen to
display the on-screen playback controls.
NOTE: INT and L/R are only available for VCDs.
• SRC: Touch to view the SOURCE menu and select a
new playback source.
• INT: During VCD playback, touch to play the first 15
seconds of each track. When a desired track is reached,
press the INT button again to cancel the function and
play the selected track.
• : No function.
• L/R: During VCD playback, touch to choose between
Mono Left Channel, Mono Right Channel, and Stereo.
• : Press to stop and retain playback position. Press
again to stop and return to beginning of disc.
• : Touch to move to the previous track.
• : Touch to move to the next track.
• SEL: Touch to adjust Equalizer/Audio and Display
settings.
• AUDIO: Touch to choose an alternate audio language, if
available.
• : No function.
• SUBTITLE: Touch to activate subtitles, change subtitle
language or disable subtitles, if available.
• : Touch to suspend playback. Touch again to resume
playback.
Stopping Playback
Touch the button on screen or on the remote control (14) to
stop disc play.
To resume playback, touch the /|| button on screen or on the
remote control (19).
Pausing Playback
Touch the /|| button on screen or on the remote control (19)
to suspend or resume disc play.
Moving Through Tracks
Press the >>| button on the remote control (18) or on screen
to advance to the next chapter on the disc.
Press the |<< button on the remote control (17) or on screen
to move to the previous chapter.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons on the remote control
or on screen to fast forward or fast reverse. Press and hold
once for X 2. Press and hold additional times for X 4, X 8, X
20 or PLAY. Press the play/pause >/|| button to end fast
forward or reverse and resume normal playback.
Repeat Chapter/Title (REPT)
Press the REPT button (7) on the remote control multiple
times during playback to select from the following repeat play
options:
• VCD: REP ONE (track), REP ALL (disc), REP OFF
• DVD: REP Chapter, REP Title, REP OFF
Repeat Section (REPT A-B)
To repeat a specified section of a track (chapter), perform the
following steps:
• Press the A->B button on the remote control (6) to
select the starting point. The display will show “REPEAT
A-”.
• Press A->B when you reach the desired ending point.
The display shows “REPEAT A-B” and the selected
section will play repeatedly.
To cancel section repeat, press the A->B button again. “A-B
CANCEL” appears on the display.
DVD Playback Features
The following remote control features are available during
DVD playback:
• AUDIO: Press to choose an alternate audio language, if
available.
• SUBTITLE: Press to select an alternate subtitle
language, if available.
SRC
SEL AUDIO
INT
SUBTITLE
L/R