Filter
Top Products
16
UV8020
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and CD operation. Please see the DVD/Disc Video
Operation section for information about these topics.
The UV8020 will play music or other audio files from the
following disc media:
• CD-DA
• CD-R/RW
•DVD
•DVD+R/RW
•DVD-R/RW
• SD Card (see “MP3/WMA Operation” on page 18)
Upon inserting a disc, the TFT screen will close automatically
and the track number and elapsed playing time will appear at
the top of the screen (see “CD Playback Information” on
page 17).
CD Player User Interface
The on-screen indicators and touch key areas for CD
playback are outlined below.
• SRC: Touch to view the SOURCE menu and select a
new playback source.
• INT: Touch to play the first 15 seconds of each track.
When a desired track is reached, press the INT button
again to cancel the function and play the selected track.
• : No function.
• : Press to stop playback.
• : Touch to move to the previous track.
• : Touch to move to the next track.
• SEL: Touch to adjust Equalizer/Audio and Display
settings
• RPT: Touch to activate/deactivate Repeat play mode
• : No function.
• RDM: Touch to activate/deactivate Random play mode.
• : Touch to suspend playback. Touch again to resume
playback.
Controlling Playback
Stopping Playback
Touch the button on screen or on the remote control (14) to
stop disc play.
To resume playback, touch the /|| button on screen or on the
remote control (19).
Pausing Playback
Touch the /|| button on screen or on the remote control (19)
to suspend or resume disc play.
Moving Through Tracks
Press the >>| button on the remote control (18) or on screen
to advance to the next track on the disc.
Press the |<< button on the remote control (17) or on screen
to move to the previous track.
Repeat Chapter/Title (REPT)
Touch the RPT button on screen or press the REPT button
(7) on the remote control multiple times during playback to
select from the following repeat play options: REP ONE
(track), REP ALL (disc), REP OFF.
Repeat Section (REPT A-B)
To repeat a specified section of a track (chapter), perform the
following steps:
• Press the A->B button on the remote control to select
the starting point. The display will show “REPEAT A-”.
• Press A->B when you reach the desired ending point.
The display shows “REPEAT A-B” and the selected
section will play repeatedly.
To cancel section repeat, press the A->B button again. “A-B
CANCEL” appears on the display.
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons on the remote control
(18, 17) or on screen to fast forward or fast reverse. Press
and hold once for X 2. Press and hold additional times for X
4, X 8, X 20 or PLAY. Press the play/pause /|| button to end
fast forward or reverse and resume normal playback.
Programmed Playback
1. Press the PROG button (34) on the remote control to
access the programmed playback screen:
2. Use the , , or cursor buttons to access the
fields on the “PROG” screen.
3. Use the number buttons on the remote control to enter a
track number in each field.
4. Press the || button (19) on the remote control or
highlight “PLAY” on screen and then press OK to begin
playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press OK.
Press PROG to exit the programmed playback screen.
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote
control (27). For single digit entries, press the corresponding
number. For two digit entries, press the 10+ button followed
by the last digit (i.e., for track 16, press 10+ and then 6).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1. Press the GOTO button (20) on the remote control. The
On Screen Display information will appear with the track
number highlighted.
2. Use the number keys on the remote control to enter the
3-digit track number directly (i.e. for track 10, enter
“010”.
3. Press the OK button (26) to confirm and begin playback.
SRC
SEL RPT
INT
RDM
PROG
OK