Jensen VM9424 Car Video System User Manual


 
8
VM9424
USING THE TFT MONITOR
Aspect Ratio
Press the WIDE button (4) on the monitor to adjust the aspect ratio as follows:
Picture Adjustment
To adjust monitor display settings, perform the following steps:
1. Press the PIC button (24) on the remote control to view the “Picture
Menu”.
2. Rotate the VOL button (5) on the front panel to adjust the brightness level
from 0 (least bright) to 20 (most bright).
3. Wait 5 seconds, or press the PIC button (24) on the remote control to exit
the picture menu.
Parking Brake Inhibit
When the pink "PARKING" wire is connected to the vehicle Parking Brake
circuit, the front TFT monitor will display video when the Parking Brake is
engaged. (When the pink wire is grounded via the Parking Brake circuit, video
will be displayed.)
FULL
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
NORMAL
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
STANDBY
Screen becomes black. Touch
screen to resume.