Filter
Top Products
22
VM9424
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen displays
“PARKING” with a blue background. Rear zone video outputs and rear
video screens, if applicable, will operate normally.
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see “To reset the password, access the “Set Password”
option and enter the current password to unlock the field. Access the
“Set Password” again once unlocked and enter a new password. You
must enter the same password twice to confirm.” on page 18).
You cannot insert a disc if there is already a disc in the unit or if the power is
off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.
Ejecting a Disc
Press the button (6) to eject the disc. The unit automatically reverts to Tuner
mode. You may eject a disc with the unit powered off. The unit will remain off
after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button (6) to reset the loading mechanism. Normal
operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button
(10) on the front panel or remote control (8).
NOTE: See “Controls and Indicators” on page 5 for the location of
control panel buttons.