Filter
Top Products
OPERATIONS
31
ENGLISH
Connecting/disconnecting a registered
device
1
2
3
4
Select the desired setting.
• For connecting: Select<Phone Connect>/
<Audio Connect> then go to the next step.*
• For disconnecting: Select <Phone Disconnect>/
<Audio Disconnect>.
5 Select the registered device you want to
connect.
* When a device has already connected to the unit,
<Phone Connect> and <Audio Connect> do not
appear.
The device remains registered even after you
disconnect the device. Use <Phone Connect> (or
activate <Auto Connect>) to connect the same
device from next time on. (☞ pages 57 and 58)
3
4
Enter a PIN (Personal Identification Number)*
code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
• To delete an unwanted digit, select a blank.
5
starts flashing.
6 Operate the target Bluetooth device. (While
“Open...” is displayed on the monitor.)
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use the
device through the unit.
turns blue and the following icon appears when the
connection is established.
Appears when the Bluetooth phone is
connected.
Appears when the Bluetooth audio player is
connected.
Appears when the Bluetooth phone and the
Bluetooth audio player are connected.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (☞ page
58)
EN_KDAVX40[J]3.indb 31EN_KDAVX40[J]3.indb 31 08.12.25 6:31:05 PM08.12.25 6:31:05 PM