Filter
Top Products
65
REFERENCES
ENGLISH
Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT (optical) terminal
Digital signals (Linear PCM, Dolby Digital and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder
compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly. (☞ page 54)
• DTS sound cannot be emitted.
<D. Audio Output>
Playback disc
Output signals
<PCM Only> <Dolby Digital> <Stream>
DVD 48 kHz, 16/20/24 bits Linear
PCM
48 kHz, 16 bits stereo Linear PCM*
96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM
with Dolby Digital 48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
with MPEG Audio 48 kHz, 16 bits stereo Linear PCM
MPEG bitstream
Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
MPEG with Dolby Digital 48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
with MPEG Audio 32/44.1/48 kHz, 16 bits Linear PCM
MP3/WMA 32/44.1/48 kHz, 16 bits Linear PCM
WAV 44.1 kHz, 16 bits Linear PCM
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs
are not copy-protected.
EN_KDAVX40[J]3.indb 65EN_KDAVX40[J]3.indb 65 08.12.25 6:31:26 PM08.12.25 6:31:26 PM