Filter
Top Products
SETTINGS
55
ENGLISH
Menu items Selectable settings, [reference page]
Input
External Input*
5
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod*
6
: CD changer or iPod ☞ [39, 40]
External Input: Any other than the above. ☞ [48]
• For connecting KS-SRA100/XMDJVC100, this setting is not required. It
is automatically detected.
Others
Beep Off: Cancels.
On: Activates the key-touch tone.
Telephone Muting*
7
Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the cellular phone.
Illumination You can turn off the touch pad controls and monitor lights while turning
on the unit. ☞ [5]
Touch pad controls Monitor
Normal: Always lights.
Proximity/Motion: Lights up when your hand
moves close to the controls.
Always lights.
Proxi/Motion-LCD: Light up when your hand moves close to the
controls.
Touch Pad: Lights up when your finger
touches the controls.
Always lights.
Touch Pad-LCD: Light up when your finger touches the controls.
Initialize
Initialize all settings you have made in <AV Menu>. Hold 6, then
reset the unit. ☞ [3]
*
1
Selectable only for “Disc” and “USB.” (Playback stops when you select one of the items.)
*
2
Appears only when a SIRIUS Satellite Radio is connected.
*
3
Not selectable when “AV Input” is selected as the source.
*
4
The REVERSE GEAR SIGNAL lead connection is required ☞ “Installation/Connection Manual.” The rear view through
the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
*
5
Not selectable when the component connected to the CD changer jack is selected as the source.
*
6
The name of the component detected through the CD changer jack is shown.
*
7
The TEL MUTING lead connection is required. ☞ “Installation/Connection Manual.“
EN_KDAVX40[J]3.indb 55EN_KDAVX40[J]3.indb 55 08.12.25 6:31:22 PM08.12.25 6:31:22 PM