Filter
Top Products
29
RECORDING (TIMER)
The
(red dot) button allows you to set up a programme at any time for recording on an external
recorder. The programme to be recorded can be selected in any of the EPG views, provided
the
(red dot) button appears at the bottom of the screen display.
If the programme appears on the EPG:
Select the desired programme and press the
(red dot) button. The following display appears
(see example picture below):
If the programme does not appear on the EPG:
Select any programme on the channel on which the desired programme is to be transmitted at a later
time and press the
(red dot) button (starting and fi nishing times together with the recording date
must be input manually).
Use the
buttons to select the desired recording mode. The following recording mode options
are available:
- Once: The recording will be performed once
- Daily: The recording will be performed daily at a time specifi ed by you
- Weekly: The recording will be performed once a week on the same day and at the same time
Use the cursor buttons (
@
) to select the further items and use the keypad to complete the settings.
When all settings have been made, press the
button to save the recording settings. You can view the
scheduled recordings in the Timer List of the EPG (see “Timer list” section).
EPG - ELECTRONIC PROGRAMME GUIDE
Remember to pro-
gramme your external
recorder in accord-
ance with the record-
ing list programmed
in the receiver.