Filter
Top Products
53
SERVICE MENU
Select the “Service” menu using the
button, the
buttons in the main menu and
.
The following display appears:
Current software version
Last update run
Hardware version
Date of the channel list
FACTORY RESET
Select the “Service” menu using the
button, the
buttons in the main menu and
.
Use the
buttons to switch to “Factory Reset” and to call them up press the
button.
The following display appears:
You are now prompted to enter
the PIN code (factory default
setting: 0000). After entering the
PIN using the number pad you
are shown the following display:
Press the
button to load the factory settings. You will also be asked if you wish too delete the channel
list. Press the
button to delete the channel list, or press the
button merely to reset to settings.
Following the factory reset the receiver then automatically starts the First Installation procedure.