Kathrein UFC 662sw Car Satellite TV System User Manual


 
39
LOCK CHANNELS
Use the

buttons to select the channel to be blocked in the favourites list you have selected.
Press the
button to open the edit menu and use the

buttons to select the “Lock” function.
Con rm the command by pressing the
button. You are now prompted to enter the PIN code
(factory default setting: 0000).
The channel you previously selected is now shown with a padlock to its right. In future this channel
can be viewed only by entering the four-digit PIN code.
The channel is also locked on all other channel lists. You need not additionally lock the channel in the
other channel lists.
This function can be restored again using the edit menu (select: “Unlock”).
RENAME FAVOURITES LIST
Use the

buttons to select the favourites list to be renamed. Press the
button to
open the edit menu and use the

buttons to select the “Rename favourites list” function.
Con rm the command by pressing the
button. A keypad will now be displayed with which you
can enter the desired name alphanumerically using the numeric pad on the remote control. See also the
section “Operating Instructions”, “Alphanumeric Entries”)
START BLOCKSELECTION (HIGHLIGHTING SEVERAL CHANNELS)
Use the

buttons to select the channel starting from which you want to highlight further channels.
You can only select channels that are listed in succession in your selected favourite list. Press the
button to open the edit menu and use the

buttons to select the “Start Blockselection”
function. Con rm with the
button. Now use the

buttons to highlight the desired channels,
starting from the previously highlighted channel and working upwards or downwards. The highlighted
channels will be highlighted in yellow and marked with a tick on the left. When you have highlighted
the channels that you wish to select, press the
button to open the edit menu once again and use
the

buttons to select the desired function (“Remove from favourites list”, or “Unlock”). Con rm
with the
button.
The selected function can now be used in the same way as described for the respective items in this
section for a single channel.
EDIT TV-CHANNELLIST