Kenwood BT948HD Car Stereo System User Manual


  Open as PDF
of 76
 
26
|
KDC-X995/ KDC-BT948HD
Operation of hands-free phoning
Getting Started
Before use the cell-phone, you need to connect cell-
phone to this unit.
⁄
• FordetailsontheBluetoothcell-phonewiththehands-
free function, see <AbouttheCell-Phone>(page61).
1
Enter easy pairing mode
Press the [ ] button for at least 1 second.
2
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3
Select a cell-phone name
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Input the PIN code
1. Turn the [VOL] knob and press it when the
desired item is displayed.
Select the digit.
2. Turn the [VOL] knob to select the numbers,
and then press the [VOL] knob.
5
Transmit the PIN code
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
6
The receiver is connected to a cell-phone, with
“HF Connect” displayed, and exits the easy
pairing mode.
⁄
• Formoredetails,see<Easy pairing function> (page 48).
Receiving a Call
Answering a Phone Call
Press the [VOL] knob.
⁄
• Thefollowingoperationsdisconnecttheline:
- Insert a CD.
- Connect a USB device.
• Thenameofthecallingpartyisdisplayedifithasalready
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [ ] or [SRC] button.
During a Call
Disconnecting a Call
Press the [ ] or [SRC] button.
Switching to the Private Mode
Press the [38] knob.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Dependingonthetypeofyourcell-phone,switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ANSWER”.
Answering another Incoming Call after
Terminating the Current Call
Press the [ ] or [SRC] button.
Continuing the Current Call
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “REJECT”.
SRC
4
VOL
¢
38
MENU
SEARCH MODE
DISP
 previous next