Kenwood BT948HD Car Stereo System User Manual


  Open as PDF
of 76
 
42
|
KDC-X995/ KDC-BT948HD
Audio Adjustments
Listening Position Selection
The sound environment can be compensated in
accordance with the selected position. According to
the listening position, select the position from the
following settings.
Display Compensation seat
“ALL” Not compensating.
“Front-Left” Front-Left seat
“Front-Right” Front-Right seat
“Front” Front seat
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Preset position setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Position” > “Preset Position”.
4
Select the seat you want to compensate
Press the [4] or [¢] button.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Function of KDC-X995
Listening Position Fine Adjustments
Making fine adjustment of the value specified at
Preset position selection per speaker.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Manual position setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Position” > “DTA”.
4
Select the speaker you want to set
Turn the [VOL] knob and press it when the
desired value is displayed.
Item Setting overview
“FRONT” / “L” Front Left speaker
“FRONT” / “R” Front Right speaker
“REAR” / “L” Rear Left speaker
“REAR” / “R” Rear Right speaker
“SUBWOOFER” / “L” Subwoofer Left
“SUBWOOFER” / “R” Subwoofer Right
“INITIAL” Initialize the setting values.
5
Set the value
Press the [4] or [¢] button.
Adjust between 0 and 5.58 feet.
Pressthe[VOL]knobforatleast1secondifyou
want to execute the “INITIAL”.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
Display Overview
“2Zone Rear Volume”*
1
Adjust the volume of Rear channel.
“0” — “35”
“Detailed Setup”
“2Zone”
Sets the Dual Zone System.
“OFF”/ “ON”
“2Zone Select”*
1
Specifies the destination of sub source sound
when the Dual Zone function is turned on.
“Rear”/ “Front”
*
1
The Dual Zone System is set to “ON”.
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”.
4
Select the item you want to set
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• SelectMainsourceby[SRC]button.
• AdjustthevolumeofFrontchannelby[VOL]knob.
 previous next