Kenwood BT948HD Car Stereo System User Manual


  Open as PDF
of 76
 
56
|
KDC-X995/ KDC-BT948HD
Satellite Radio Tuner Control (Optional)
Basic Operation
Selecting Satellite Radio source
Pressing the [SRC] button repeatedly switches
source.
Select the “SIRIUS”, or “XM” display.
⁄
• Youneedtoregistertotheserviceprovidertoreceive
the service by Satellite Radio. Consult the service
provider if “CALL … TO SUBSCRIBE” appears.
• Theradiomaytakealittletimetostartreceivingafter
you select the Satellite Radio source.
• Ifthesignalreceptionfails,“AcquiringSignal”/“NoSignal”
appears.
Selecting the channel
Press the [4] or [¢] button.
Selecting the Preset Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SR1”, “SR2”, “SR3” or “SR4”. (SIRIUS)
Select “XM1”, “XM2”, “XM3” or “XM4”. (XM)
Satellite Radio Setting
You can select following Satellite Radio Setting
items.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Selectable setting/item
“Settings”
“Seek Mode”
Selects the tuning mode of the radio.
“Channel”: Normal manual seeking control.
“Preset”: Search in order of the channels in the
Preset memory
“ESN” Displays the Electronic Serial Number of satellite
radio.
“ESN=”
( : Factory setting)
5
Make a setting
Press the [4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Category and Channel Search mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Channel Search”.
4
Select the Category
Turn the [VOL] knob to select Category, and
then press the [VOL] knob.
5
Select the Channel
Turn the [VOL] knob to select Channel, and
then press the [VOL] knob.
SRC
4
MENU VOL
¢
 previous next