Filter
Top Products
26
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 40.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page 57 )
❏Indications and buttons on the source
control screen
AV-IN name
Operation buttons
[MODE] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name “AV-IN 1”/ “AV-IN 2”
displayed on <TOP MENU>.
[MENU] Displays the <TOP MENU> screen.
❏Starting playback
1 Connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals.
(Page 57 )
2 Select “AV-IN1” or “AV-IN2” as the
source.
On the <TOP MENU> screen:
To select “AV-IN1”
To select “AV-IN2”
3 Turn on the connected component and
start playing the source.
Using a rear view camera
• To connect a rear view camera, see page 57 .
• To use a rear view camera, a REVERSE lead
connection is required. (Page 55)
❏Activating the rear view camera
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
2
To deactivate: Select [OFF] for <R-CAM Interrupt>.