Filter
Top Products
64
❏USB
“Reading...” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
• Operate the unit after the Artwork is loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) . Other cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation). Other cables cannot be used.
❏Tuner
AME automatic presetting does not work.
• Store stations manually. (Page23 )
Static noise while listening to the radio.
• Connect the antenna firmly.
❏ AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
❏ Pandora (Only for DDX635WBT
Region4)
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
❏ Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the
player again.
REFERENCES