Kenwood DDX635WBT Car Video System User Manual


 
ENGLISH 55
CONNECTION/INSTALLATION
Connection
Connecting wires to terminals for Toyota Cars
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
For best safety, be sure to
connect the parking sensor.
Purple with white stripe
(Reverse sensor wire)
Connect the antenna
cord to the antenna
terminal.
Page57
Page57
2
5
Page57
USB terminal:
Pages56 – 57
Pages56 – 57
When using the optional power amplifier, connect to
its power control terminal.
Not used.
1
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
*
Pin Color and functions of Connector A, B, and C
A1 Orange/White Dimmer
A2 Yellow Battery
A4 Red Ignition (ACC)
A5 Blue Antenna control
A6 Black Ground connection
A8/A7
White ª / White/Black ·
Left speaker (front)
A10/A9
Gray ª / Gray/Black ·
Right speaker (front)
B2/B1
Green ª / Green/Black ·
Left speaker (rear)
B6/B5
Purple ª / Purple/Black ·
Right speaker (rear)
C6 Gray/Red Ground
C7 Light green/Red Input 1
C8 Purple/Red Input 2
Connect to vehicle’s harness.
Connect to vehicle’s harness.
Connect to the vehicle’s steering remote harness.
Depending on the type of vehicle, it cannot be
connected.
* If no connections are made, do not let the cable come out from the tab.