Kenwood DDX635WBT Car Video System User Manual


 
4
INITIAL SETTINGS
Initial s etup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
You can also change the settings on the <Setup>
screen. (Page45)
1
<Language>
(Page47)
Select the text language used for
on-screen information.
• Set <GUI Language> to
display the operation buttons
and menu items in the
selected language ([Local]:
initially selected) or English
([English]).
<Angle>
(Page7)
Adjust the panel angle.
<R-CAM
Interrupt>
(Page46)
Select [ON] when connecting
the rear view camera.
<Panel
Color>
(Page42)
Select the color of the buttons
on the monitor panel.
2 Finish the procedure.
The <TOP MENU> screen is displayed.
Setting the security function
You can set a security code to protect your receiver
system against theft.
Registering the security code
1 Display the <TOP MENU> screen.
On the source control screen:
2 Display the <System> setting screen.
3 Display the <Security Code Set> screen.
Press [K] repeatedly to change the page on
the <System> menu screen.
To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4 Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5 Repeat step 4 to confirm your security
code.
Now, your security code is registered.
When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].