Filter
Top Products
Display Mode Display
4 Exit display control mode
Press the [RTN] button.
• If the [1] — [6] button or the [NEXT] button is pressed while
"Display Type C" is selected, "Display Type C" is temporarily
switched to "Display Type B" and the function item is displayed.
After the operation is completed, "Display Type B" is returned to
"Display Type C".
• If <Dual Zone System> (page 21) is turned ON while "Display Type
B" or "Display Type C" is selected, the display is automatically
switched to "Display Type A".
Right side graphic part
Left side
graphic part
"Display:C"
Right side graphic part
Left side
graphic part
Function display
"Display:B"
Upper text display part
Lower text display part
Left side
graphic part
Function display
"Display:A"
Switching the display mode.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Select the display mode
Press the [2] ("MODE") button.
Each time the button is pressed the display mode switches as
shown below.
Display Mode Switching
3 Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Button Display
OFF [2] "OFF"
For 5 & 4 in. speaker [3] "5/4inch"
For 6 & 6x9 in. speaker [4] "6*9/6inch"
For the OEM speaker [5] "O.E.M."
4 Exit Speaker Setting mode
Press the [Q] button.
— 13 —
KDC-9023R_U.S_r4.pg 02.12.9 6:02 PM Page 13