Filter
Top Products
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Enter text select mode
Press the [3] ("TEXT") button.
4 Select the text in the upper text display part
Press the [FM] or [AM] button.
Select the text in the lower text display part
Press the [4] or [¢] button.
Refer to the table described later for setting items.
5 Exit Display Control mode
Press the [RTN] button.
• The setting of this function is available while "Display Type A" is
selected for the Display mode.
• Upper text display part cannot display the same information as
Lower text display part.
• The Album name cannot be displayed during WMA play.
Text Display Switching
— 15 —
Select a wallpaper to display when Display Type is set to
"Display Type B" or "Display Type C".
1 Select the wallpaper display
Refer to <Right Side Graphic Display Switching> (page 14).
2 Select the wallpaper
Display the wallpapers one after another and select one
1 Turn the wallpaper scan ON
Press the [38] button.
Each time the button is pressed the Wallpaper scan is turned
ON and OFF.
When it's ON, "SCAN" is displayed.
When it’s ON, each wallpaper is displayed every several
seconds.
2 At the wallpaper you want to display
Press the [38] button.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the [38] button.
Each time the button is pressed the Wallpaper scan is turned
ON and OFF.
2 Select the wallpaper.
Press the [4] or [¢] button.
Each time the button is pressed the wallpaper changes.
3 Exit Display Control mode
Press the [RTN] button.
Wallpaper selecting
KDC-9023R_U.S_r5.pg 02.12.19 11:39 AM Page 15