Filter
Top Products
Switching the Left side graphic Display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Switch the Left graphic part
Press the [4] ("GRPH") button.
Each time the button is pressed the Left side graphic part
switches as shown below.
Left side graphic part
Source graphic
Spectrum analyzer 1
Spectrum analyzer 2
Spectrum analyzer 3
Spectrum analyzer 4
Spectrum analyzer 5
Spectrum analyzer 6
Spectrum analyzer 7
Blank
4 Exit display control mode
Press the [RTN] button.
If <Dual Zone System> (page 21) is turned ON while the spectrum
analyzer is displayed, the left side graphic display automatically
displays the source graphic.
Left Side Graphic Display Switching
In Auxiliary input source
Information Display
Indicator & Clock "CLOCK"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Spectrum Analyzer "S/ANA"
Date "DATE"
• If <Dual Zone System> (page 21) is turned ON while the spectrum
analyzer is displayed, the spectrum analyzer disappears from the
display.
• If the Disc title, Track title, Song title & Artist name, or Album
name & Artist name is selected when the disc which does not
have Disc title, Track title, Song title, Album name, or Artist name
is played, Spectrum Analyzer & Clock are displayed.
— 17 —
KDC-9023R_U.S_r5.pg 02.12.19 11:39 AM Page 17