Filter
Top Products
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display Setting
"AMP Mute:OFF" The built-in amplifier activates.
"AMP Mute:ON" The built-in amplifier deactivates.
Built-in Amp Mute Setting <In Standby mode>
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display Setting
"System Q:ON" The System Q factors are displayed.
"System Q:OFF" The System Q factors aren't displayed.
System Q Setting
Display Setting
"Ejct Angle:Slope" Opens and closes the panel while
maintaining the angle of the control panel
to the set angle.
"Ejct Angle:Level" Opens and closes the panel after setting
the angle of the control panel to the
horizontal position.
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Eject angle setting <In Standby mode>
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
"Off Wait: 0sec"
"Off Wait: 3sec" (Original setting)
"Off Wait:25sec"
…
…
OFF Wait Time Setting
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display Setting
"Dimmer:ON" The display dims.
"Dimmer:OFF" The display doesn't dim.
Dimmer
2 Select the font
Press the [4] or [¢] button.
— 41 —
KDC-9023R_U.S_r4.pg 02.12.9 6:03 PM Page 41