Kramer Electronics Cobra R1300A Car Video System User Manual


 
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
16
6 Technical Specifications
Table 6: Technical Specifications
1
of the Cobra R1300A, Cobra R1300S2
CABLE REQUIRED: Category 5, 5e, 6 shielded or unshielded twisted pair
COMPLIANCE: CE; FCC Class A, IC Class/class A
VIDEO SUPPORT: all supported VESA modes to WUXGA (1920x1200), RGBHV, RGB,
Composite (NTSC, PAL, SECAM), S-Video, Component Video,
widescreen modes, HDTV modes including 1080p, 1080i, 720p
RESOLUTION AND REFRESH
RATE:
At 1300 ft. or less: a maximum of 1920x1200 to 60 Hz
REQUIRED SOURCE IMPEDANCE: Video OUT: 75 ohms;
Audio OUT (if any): 600 ohms maximum
REQUIRED DESTINATION
IMPEDANCE:
Video IN: 75 ohms;
Audio models: Audio IN (if any): 600 ohms minimum
AUDIO CHARACTERISTICS:
R1300A: Right/Left summed
R1300S2: Full Stereo
Line Level 600 Ohm Unbalanced
SERIAL CHARACTERISTICS: 3 wire, fixed baud rate of 9600
CONNECTORS: (1) 4 pin terminal block, (2) RJ-45, (1) HD15 F; (1) DB9M (model
dependent)
TEMPERATURE TOLERANCE: Operating: 32 to 104°F (0 to 40°C);
Storage: -4 to +140°F (-20 to +60°C).
HUMIDITY TOLERANCE: Up to 80% noncondensing
ENCLOSURE: Steel
POWER: +5 VDC @ 260 mA max
Consumption: 6 watts maximum
SIZE: 1.2" H x 4.1" W x 5.5" D (3.0 x 10.4 x 14.0 cm)
WEIGHT: 1.0 lb. (0.45 kg)
1 Specifications are subject to change without notice