Filter
Top Products
10 VA-8xl - Operating the VA-8xl
To recall a setting, via the front panel buttons, do the following:
1. When the LED displays are dimmed, press the UP button.
The abbreviation “rCL” (recall) appears in the LEFT LED display.
2. Press the appropriate CHANNEL SELECTOR button.
The abbreviation “rCL” (recall) appears in the LEFT LED display and the
number of that CHANNEL SELECTOR button appears in the RIGHT LED
display.
3. Press the same CHANNEL SELECTOR button again.
The memory recalls the setup. As confirmation, for a few seconds, “YES”
appears in the LEFT LED display and the setup number appears in the
RIGHT LED display.
If no setting is stored in the non-volatile memory with that setup #, “NO”
appears in the LEFT LED display and the setup number appears in the
RIGHT LED display.
Note:
Recalling a setup implements the amplifier gain or the attenuation
immediately