Filter
Top Products
BASIC OPERATION
-13-
b) In Radio Mode:
Press the or button
to start the
search for a radio station
briefly to manu-
ally tune the radio in single steps. Press
and hold for two seconds
automatically.
DVD/VCD/CD/MP3:
NormalPlayback2x 4x 8x 16x
11/12 . / Buttons
(tune, Seek, Track, Skip Up/down)
a) In DISC, USB mode:
if you wish to jump forwards or back-
wards press briefly the or button .
(Note: during the DVD playback , press
the button continually twice to skip
back one track during playback.)
Press and hold up for more than two
seconds to begin Fast Forward (or down
for Fast Reverse) mode. Press the
button again as needed, to cycle thru the
range of available speeds.
14. (EJECT) Button
In DISC playing ,Press the Open button
(1) to flip down the front panel, then you
can press the this button to eject the disc .
15. RESET Button
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object. The
RESET button is to be activated for the
following reasons:
A. Initial installation of the unit when all
wiring is completed.
B.All the function buttons do not operate.
C. Error symbol on the display.
16. IR sensor
17. AUX INPUT JACK
For information about using anAUX IN
audio source, please see page 15.
18. USB PORT
For information about connecting a
USB device, please see page 17.
19. TFT Display
(liquid crystal display)
The operation of the TFT,please see
page 16.
10. /CH 1-6 (RADIO PRESET)
a). In Disc Playback Mode
Press this button to pause playback,
press it again to resume playback.
B). In Radio Mode
Press this button repeatedly to preset
station. With this system a total of 30
stations can be stored in the memory .
Each band store up to six preset stations.
The stations might be FM1, FM2, FM3,
AM1 (MW1) and AM2 (Mw2) band.
The operation as below:
- store in memory
press and hold the desired memory
location for several seconds, the current
listening station will be stored into the
number location.
- retrieve a preset station
press it button repeatedly to retrieve
a station which had been stored in the
memory in advance the chosen
number is shown on display.
9.CLK Button
Press it to change the display to clock
display. Press it again to return to
previous display. In clock display, press
and hold for about 2 seconds until the
hour display flashes, rotate VOL+/-
button to adjust hours . Press it again,
the minute display flashes , rotate
VOL+/- button to adjust minutes.
13. MOD BUTTON
Press it repeatedly to select AUX IN ,
RADIO and DISC mode. During the USB
playback, you can press STOPbutton
and then press GOTO button to select
the DISC mode.