Filter
Top Products
Choose the mounting location where the
unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect
the wiring temporarily and make sure
all connected up properly and the unit
and the system work properly.
Use only the parts included with the unit
to ensure proper installation. The use
unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if insta-
llation requires the drilling of holes or
modifications of the vehicle.
Install the unit where it does not get in
the driver s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
NOTES:
it
is
of
other
'
30
INSTALLATION
-4-
DASHBOARD
METALMOUNTING
STRAP
HEXNUT
SPRINGWASHER
PLAINWASHER
TAPPINGSCREW
CONSOLE
SLIDEBRACKET
HOUSING
HEXBOLT
If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from "Front"(conventional DIN Front-
mount) or "Rear"(DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.