Filter
Top Products
31
206-4118
Changing a Channel’s ICON
on the Master TV
1. With Channel Up/Down, select the
channel for which you wish to
change the icon.
2. With the ADJ Left/Right arrow,
select the thin letter “I” on the
Channel ID display.
3. Use the Up/Down arrow keys to
select the icon with which you want
to identify the channel. (If you know
the icon number, enter the number,
and press ENTER/SELECT.)
4. Proceed with changing/adding
channel labels, or go to the next
channel.
Changing/Adding Channel
Labels on the Master TV
1. With Channel Up/Down, select the
desired channel.
2. Press the ADJ Left/Right arrow
repeatedly until the numbers 1 to 7
appear on the display. The number
shows the position of the character
that can be changed. Number 1 is
the first character, number 2 the
second character, and so on.
3. Use the Up/Down arrow keys to
select the desired character.
4. Proceed to the next number posi-
tion or use Channel Up/Down to go
to the next channel.
Changing Source Labels on
the Master TV
1. Press INPUT to select the desired
Aux input source: A/V 1, A/V 2,
HDMI Component, RGB, etc.
2. Press the ADJ Left/Right arrow
repeatedly until the numbers 0 to 9
appear on the display. The number
shows the position of the character
that can be changed.
3. Use the Up/Down arrow keys to
select the desired character.
4. Press INPUT for the next Aux source,
or proceed with changing an icon or
changing/adding labels. Use Channel
Up/Down to return to channels.
• Channel Up/Down: Tunes in the next channel in scan.
• Left/Right Arrows: Select the item to change. If “I” is
shown, the icon can be changed. If a number is shown, it
indicates the position of the character that can be changed.
• Up/Down Arrows: Select the icon or the character to be
displayed. Tip: Arrows can be held down for fast scrolling.
• 0 – 9: Use to enter the index number of the icon, if known.
• ENTER/SELECT: Changes the icon after the number
has been entered.
• INPUT: Changes the Aux input label.
• MENU: Exits the editing process.
Installer Remote Control Key Functions for Master TV Channel Editing/Labeling Menu
Reference: Adding Channel Icons / Custom Channel Labels (2-5-4 +
MENU Mode)
Editing/Adding Channel Icons and/or Labels
If there is no pre-assigned icon, you can make a custom
channel label of up to seven (7) characters to help identify
a channel or network. If desired, channel labels can also
be added in addition to a pre-assigned icon. You may also
add labels for the Aux input sources to clearly identify the
devices that are connected to the Aux inputs.
Editing and adding the labels can only be done if there are
channels entered into the TV’s Channel Map either by using
the method described on the previous page, by cloning, or
by using the master remote control from the PPV provider.
Note: A blank letter space is available between “Z” and “!”.
To perform channel editing/labeling, proceed
as follows:
1. Enter the TV Installer Menu.
2. Press 2-5-4 + MENU to enter the Channel Label Editing
Mode.
3. Add your channel icons and channel labels as
described in the procedures below. (You can do this
more than once.)
4. To exit the menu when you are done, press MENU.
1
2
3
4
5
6
7
XYZ
XYZ
XYZ
NETWORK
(Icon)
(Label)