Filter
Top Products
10
206-4214
Pro:Centric Setup
Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be
specied on the TVs.
On the TVs, the Pro:Centric server settings must be congured appropriately to enable Pro:Centric remote
management/administration facilities, while the Pro:Centric Application Mode must be set appropriately to
enable the Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric Admin Client.
The Pro:Centric server settings can be congured using one of the following methods:
• When the TV is in a factory default state, the Automated Installation Routine Wizard provides Auto or
Manual options for conguring the Pro:Centric server settings.
The Automated Installation Routine Wizard also provides a USB Conguration option that enables you
to congure a TV for FTG Mode via CPU using an FTG Conguration (.tlx) le stored on a USB memory
device. The FTG Conguration le incorporates FTG Installer Menu settings, which includes Installer
Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL.
Refer to “Automated Installation Routine Wizard” on pages 11 to 14 for further information on the
Automated Installation Routine Wizard options.
• If the TV is in Pass-through Mode, either:
− Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
Refer to “Installer Menu” information on pages 19 to 27 for further information. Also, as necessary,
refer to “Custom Master TV Setup” information on pages 15 to 18 and/or cloning information on pages
29 to 37.
− Congure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. See
“Accessing the IP Environment Menu” on page 49 and “Pro:Centric Setup” on page 53 for further
information.
• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update the Data Channel and
Pro:Centric Installer Menu items (along with their afliated elds) and then transfer the FTG Installer Menu
settings to the TV in accordance with the FTG Mode of conguration. Refer to “FTG Mode of Operation
Overview” on pages 38 and 39 for further information on FTG Mode operation and conguration.
Pro:Centric Operation (Cont.)