Filter
Top Products
32
206-4214
USB Cloning Procedures (Cont.)
Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File
USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 29 before beginning any cloning procedures.
• You may edit a lename as part of the Learning procedure; however, a le with edited contents will not
be recognized.
• It is not possible to clone a Master TV’s clock using a USB memory device. Either set a Target TV’s clock
manually, or use the Auto Clock setting in the TV setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Plug the USB memory device into the USB IN port on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus. Use the arrow navigation keys to select/highlight the
Option menu icon, and then press the number “7” key a total of seven
times to display the USB Download Menu.
4. To gain access to the “Learn From TV” option in the USB Download
Menu, key in the password used to access the Installer Menu
(Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLL), and then
press OK.
6. To differentiate this .tll le from others, you can use the Up/Down arrow
keys to change the last ve digits of the lename. Press OK when you
are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. When
the Learning process is complete, the USB Download menu will reappear
on the screen.
7. When Learning is done, press on the Installer Remote to exit the
USB Download Menu, and remove the USB memory device from the
Master TV.
Learn From TV
UPDATING...
Do not remove the USB from the port!
Do not unplug!
25%
!
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous OK
Learn From TV (TLL)
Select the le name and press OK to start
Previous OK
V
V
xxLT770H-UA00001.TLL